= 3D Printing: From model to finished print (de/en)

---- dataentry asm22workshop ----
Titel          : 3D Printing: From model to finished print (de/en)
Workshopleiter : max
Wann           : Sonntag, 16:00-18:00
Wo             : Labor
Dauer          : 2 Std
----


== Beschreibung
You'll learn the basics of 3D slicing, materials and best practices for 3D printing.

After a light introduction to the topic we'll setup your computers to be able to slice GCode for the Ender 5 printer that I'll provide for the workshop.

Then we will do some printing! But since already a medium sized 3D print often takes hours to complete, I've selected a small but useful surprise for you to print during the workshop. This way hopefully everyone is able to test their setup and take home something useful.

Contact me on telegram (@maximilian) or on matrix max@freitrix.de
== Teilnahmevoraussetzungen
Eagerness to learn 3D printing basics

== Mitbringen
* Laptop (if you want to setup your own slicer)
* Cura 4.13.1 (https://github.com/Ultimaker/Cura/releases/tag/4.13.1)
* The example model file (https://www.thingiverse.com/thing:2481258)
* Some 1.75mm filament if you're fancy (TPU would be cool to try)
* https://geile.software/projects/3d-print
== Material / Unkosten
None, but a small donation towards the ASM register is always welcome :)
== Teilnehmer
Max. 5

^ Nummer  ^ Wer       ^
| 1       | zeitwurm  |
| 2       |           |
| 3       |           |
| 4       |           |
| 5       |           |